AutoCAD 2016 saw the introduction of the Geometric Center object snap. If you aren’t familiar with this snap, it basically will snap to the “geometric center” of an object, such as a polyline. What’s the geometric center? Well, it’s the centroid or center of mass. The problem is, this snap is not available in the Snap Override menu within Civil 3D 2016 or 2017.
<note>It was pointed out to me that this doesn’t work in 2016. The shortcut menu in the ACAD.CUI that is installed with Civil 3D 2016 is incomplete as well. If you are using 2016, you’ll need to copy the menu from the ACAD.CUI that gets installed with AutoCAD, not the one installed with Civil 3D. Open the ACAD.CUI in the transfers tab and copy it over that way. </note>
You’ll also notice that in AutoCAD, you get the icons showing what the different snaps do whereas in Civil 3D, you don’t. If you want to enable this, you’ll need to replace the Civil 3D Snap Override menu with the AutoCAD version. To do this, go into your CUI editor (type CUI at the command line if you haven’t been there before).
In the CUI, scroll towards the bottom (I hid the Command List to make it easier to see), expand out Partial Customization Files, ACAD, and Shortcut Menus. Under the Shortcut Menus, right click on “Object Snap Cursor Menu” and choose “Copy”. Now that the AutoCAD version is copied, we’ll go replace the Civil 3D version with the AutoCAD version. Collapse up the Partial Customization Files and expand out Shortcut Menus (directly under CIVIL), right click on Object Snap Cursor Menu and choose Delete.
Once the old menu has been deleted, right click on the Shortcut Menus and choose Paste. This will paste the AutoCAD version of the menu that we copied into the Civil CUI file. Now, simply close the CUI editor and return to Civil 3D and be happy with your new snap overrides menu.